Find thousands of books, manuscripts, visual materials and unpublished archives from our collections, many of them with free online access.

X-ray of a knee joint printed on coated aluminium, artwork

  • Chiara Salvi
  • Digital Images
  • Online

Available online

view X-ray of a knee joint printed on coated aluminium, artwork

Licence

Attribution 4.0 International (CC BY 4.0)
You can use this work for any purpose, including commercial uses, without restriction under copyright law. You should also provide attribution to the original work, source and licence.
Creative Commons Attribution (CC BY 4.0) terms and conditions https://creativecommons.org/licenses/by/4.0
Credit: X-ray of a knee joint printed on coated aluminium, artwork. Chiara Salvi. Attribution 4.0 International (CC BY 4.0)

Selected images from this work


About this work

Description

A 3D digital representation of a knee joint Xray, printed onto aluminium plates. The xray image was printed digitally onto acetate and used as a negative. Silver gelatin was used to coat aluminium plates, making them photosensitive. These coated aluminium plates were then treated as a photographic piece of paper: the artist has used the traditional analogue processing methods of developing and fixing to produce the final images. This method was the primary processing method between the 1880s and the 1960s, before colour photographs gained popularity. This image is of the knee joint as seen from the left. The knee cap, or patella, is the small bone to the left of the image. The bone above the joint is the femur, and two bones below are the tibia (left) and fibulla (right). This image is part of a bigger project called 'Soffice' or 'De Humani Corporis Fabrica' The original artwork is 11 x 14 cm.

Contributors



Permanent link